Cisco GLC-LH-SMD Compatible SFP For Your Network

With the development of the businesses, must also have the development of the networks.This is a cannot be avoidable side-effect of expansion and maturation in a company.

If you meet the point, you just begun to consider buying a larger property, or being planned in another workplace. You may return to the past ten years of the limitations of technology. Standard baseT100 Ethernet is fine for a small office, but it isn't suitable for handling heavier network use. Since your network expands, you may experience problems like:

• Dropouts in your VoIP calls
• Sluggish data retrieval speeds
• Spotty WiFi coverage across a large areas
• Difficulty leveraging Cloud-based applications
• Or poor video streaming quality

If any of this sounds familiar, it might be time for you to start considering upgrading to gigabit Ethernet, which fast at 10 times the speed of traditional Ethernet.

Twisted Copper vs Fiber Optic Gigabit Ethernet

Another major consideration would be to determine whether or not you need to keep using copper-wire cabling or upgrade to fiber optic cabling in your offices. It's more costly, but fiber optic provides several benefits over copper, while still supplying the same gigabit speeds.

Fiber optic cable supports far longer cable lengths than twisted copper. Copper can only run for around 100 meters, whereas fiber can go between 200 and 500 feet, or even more, without signal loss.

Fiber has gives off no radio interference, letting it to coexist easier in an office with a lot of wireless devices. Because of the lack of interference, fiber is also harder to hack into than copper. Just as with copper, a standard GLC-LH-SMD transceiver links fiber optic Ethernet with your existing equipment.

If you have looked ahead to the future, leaving copper might be a good choice. Fiber optics are increasing steadily in popularity among businesses that have taken over largetwisted-copper office buildings, created expansive complexes, or have an obligation to collaborate with remote offices immediately.

Using GLC-LH-SMD Transceiver To Connect Fiber Optic Network

The greatest benefit of Cisco SFP product is just entirely hot-swappable. No matter what the device is, it from servers to your switch to simple Ethernet cards: If it includes a SFP port on it, it could support many transceivers for different functions, through one standardized interface. In fact, that standardization shows that compatible modules can produce transceivers which are as good as official Cisco units. (cisco compatible sfp transceiver)

Cisco even has a compatible Matrix, that will help you select the best transceiver to do the job. So, if you think that fiber optic gigabit Ethernet is exactly what you require for your future business communications needs, the GLC-LH-SMD transceiver is truly easy to install and utilize. Simply plug it on your switch or any other device, plug in the brand new network cable, and it should recognize the network in a few moments.

There are a few different gigabit Ethernet standards to choose from. So you must research and think which is the most suits for your situation or for the future of your business. Just remember that you will need transceivers such as the GLC-LH-SMD to connect your current devices to the new network.

More about Brand Compatible SFP Modules:
Brand Compatible SFP For Optical Communications