Juniper Networks SFP Module EX-SFP-10GE-SR

With the rapid development of fiber optic technologies, 10G Ethernet products are coming to fit the increasing demand for bandwidth. SFP plus is the 10G fiber optic transceiver used for 10G Ethernet and other high speed transmissions.

SFP plus is the upgraded version of the former SFP transceivers (MINI GBIC), SFP is with higher data rate and new industrial standards. SFP is with more compact size compared with the former 10G transceivers X2 and Xenpak, it has greater ability for density installations.

Juniper SFP transceivers are the most cost-effective standards-based optical modules fully compatible with Juniper Switches & Routers. The Juniper SFP modules are tested in-house prior to shipment to guarantee that they will arrive in perfect physical and working condition before delivered worldwide. Fiberstore provides Juniper compatible SFP transceivers which can be equivalent to EX-SFP-10GE-SR, EX-SFP-10GE-LR, SFPP-10GE-SR, EX-SFP-10GE-ER, etc. And today, let me introduce Juniper EX SFP 10GE SR first.

Juniper EX SFP 10GE SR Brief Information

This Juniper compliant EX-SFP-10GE-SR is a 10GBASE SR SFP 850nm 300m transceiver module. The EX SFP 10GE SR transceiver module combines quality with low cost and gives you an ideal alternative except for the high price transceivers. The EX SFP 10GE SR is 100% compatible with all Juniper series switches and modules which support SFP transceivers.

Key Features

• Operating data rate up to 10.3Gbps
• 850nm VCSEL Transmitter
• TX Power :-6~-1dBm
• Receiver Sensitivity:-11.1dBm
• Distance up to 300m @50 / 125 um MMF
• Single 3.3V Power supply and TTL Logic Interface
• Duplex LC Connector Interface, Hot Pluggable
• Compliant with MSA SFP+ Specification SFF-8431
• Compliant with IEEE 802.3ae 10GBASE-SR/SW
• Power Dissipation < 1.0W
• Built-in Digital Diagnostic Function

Applications

• 10GBASE-SW at 9.953Gbps
• 10GBASE-SR at 10.3125Gbps
• Other Optical Link

This SFP (mini-GBIC) transceiver module is designed for use with Juniper Networks network equipment and is equivalent to Juniper Networks part number EX-SFP-10GE-SR. This transceiver is built to meet or exceed the specifications of the OEM and to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, and compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a fiber optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize and perform identically to an OEM transceiver. This transceiver may be mixed and deployed with other OEM or third party transceivers and will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page.

fiberstore.com have a large quantity in stock transceivers and can ship in the Juniper EX SFP 10GE SR transceivers, you will find the cost effective modules here and you will find our Juniper EX SFP 10GE SR beyond your expectation, All of our module transceivers are tested in house prior to shipping to insure that they will arrive in perfect physical and working condition. Contact us today to save the time and cost by buying from original manufacturer directly. And now fiberstore is making a discount of 30% of the price about Juniper SFP.

Article Source: http://www.fiber-optic-cable-sale.com

Netgear SFP Transceiver Offered By Fiberstore

Fiberstore is a the Largest World's Optical Network Products Supplier For CWDM/DWDM Solution, Data Center Solution & Fiber Cabling Solution. And today let me show you the NETGEAR sfp transceiver module offered by Fiberstore. How much do you know about NETGEAR?

NETGEAR Company Info

Global leader in the enterprise network solutions, and the digital home network applications advocate NETGEAR - NETGEAR Inc., founded in January 1996, has been committed to network technology innovation, focus on improving the reliability and ease of use of products, and provide global family of commercial enterprise users and individual users with ease of use of high quality network solutions.America NETGEAR headquartered in San Jose, California (San Jose, CA), have set up branches in 25 countries around the world, products through 37000 dealerships in the global 28000 retail terminal sales.For consumers, the net provides a high performance, high reliability and easy to use home network, home storage, digital media and other products that consumers can easily access to the Internet.For enterprise users, the network thing for their IT infrastructure to provide powerful data storage, security, exchange and wireless solutions, without expensive cost.Thing at the same time, the network also for the world's top operators network products, help operators to build digital home for their users.

And after that, may be you don't know sfp transceiver well, just easy.

SFP Classification

Based on the rate NETGEAR SFP have 155 m / 155 m / 1.25 G / 2.125 G / 4.25 G / 8 G / 10 G, with 155 m and 1.25 G, those are very common on the market, 10 G technology is gradually mature, demand is developing with the attitude of rise. According to the wavelength NETGEAR have 850 nm / 850 nm / 1550 nm / 1490 nm / 1530 nm / 1610 nm, the wavelength of 850 nm for the SFP multimode, transmission distance under 2 km, is 1310/1550 nm wavelength for single mode, transmission distance above 2 km, the three wavelengths are relatively cheaper prices than other three.

Multimode, Almost all of the multimode fiber dimensions are 50/125um or 62.5/125um, and the bandwidth (the amount of information transmission fiber) is usually 200MHz to 2GHz. Multimode Optical via multimode fiber can be up to 5 km of transmission.

Single-Mode, The size of single-mode fiber 9-10/125um, and a multimode optical fiber compared with unlimited bandwidth and low loss characteristics. The single-mode optical transceiver used for long-distance transmission, and sometimes up to 150-200 km. Using a narrow spectral line LD or LED as a light source.

NETGEAR SFP/SFP+ transceivers offered by Fiberstore are third-party optical modules fully compatible with NETGEAR Switches & Routers. The NETGEAR SFP modules can be mixed and deployed with NETGEAR OEM SFP transceivers for seamless network performance and interoperability. Fiberstore NETGEAR SFP modules are the most cost-effective and 100% tested before delivered worldwide. Fiberstore provides NETGEAR compatible SFP transceivers which can be up to 1G and 10G rate. Products showing as the following:

• NETGEAR AGM731F Transceiver is compatible with 1000BASE-SX SFP 850nm 550m
• NETGEAR AGM732F Transceiver is compatible with 1000BASE-LX SFP Transceiver Module
• NETGEAR AFM735 Transceiver is compatible with 100Base-FX 1310nm 2km SFP LC Transceiver Module
• NETGEAR AGM733F Transceiver is compatible with 1000BASE-ZX SFP Transceiver Module
• NETGEAR AA1419066-E6 Transceiver is compatible with 1000Base-CWDM 1570nm 70km SFP Transceiver
• NETGEAR AXM761 Transceiver is compatible with 10GBase-SR SFP+ Transceiver Module

Article Source: http://www.fiber-optic-cable-sale.com

The Cisco Wireless LAN Controller Configuration

A distribution system port connects the controller to a neighbor switch and serves as the data path between these two devices. This chapter discusses a few common methods on the models that have these options.

Cisco 4402 controllers have two Gigabit Ethernet distribution system ports, each of which is capable of managing up to 48 access points (AP). The Cisco 4404 controllers have four Gigabit Ethernet distribution system ports, each of which is capable of managing up to 48 APs per port. The 4404-25, 4404-50, and 4404-100 models allow a total of 25, 50, or 100 APs to join the controller.The Gigabit Ethernet ports on the 4402 and 4404 controllers accept these SX/LC/T small form-factor plug-in (SFP) modules:

• 1000BASE-SX SFP module which provide a 1000-Mbps wired connection to a network through an 850 nm (SX) fiber-optic link using an LC physical connector.

• 1000BASE-LX SFP module which provide a 1000-Mbps wired connection to a network through a 1300nm (LX/LH) fiber-optic link using an LC physical connector.

• 1000BASE-T SFP module which provide a 1000-Mbps wired connection to a network through a copper link using an RJ-45 physical connector.

The Cisco 5508 controllers have eight Gigabit Ethernet distribution system ports through which the controller can manage multiple APs. The 5508-12, 5508-25, 5508-50, 5508-100 and 5508-250 models allow for 12, 25, 50, 100 or 250 APs to join the controller. Cisco 5508 controllers have no restrictions on the number of APs per port. However, Cisco recommends using link aggregation (LAG) or configuring dynamic AP-Manager interfaces on each Gigabit Ethernet port to automatically balance the load. If more than 100 APs are connected to the 5500 series controller make sure that more than one Gigabit Ethernet interface is connected to the upstream switch. The Gigabit Ethernet ports on the 5508 controllers accept these SX/LC/T small form-factor plug-in (SFP) modules:

• 1000BASE-SX SFP module, which provide a 1000-Mbps wired connection to a network through an 850nM (SX) fiber-optic link using an LC physical connector

• 1000BASE-LX SFP module, which provide a 1000-Mbps wired connection to a network through a 1300nM(LX/LH) fiber-optic link using an LC physical connector

• 1000BASE-T SFP module, which provide a 1000-Mbps wired connection to a network through a copper link using an RJ-45 physical connector

The Cisco Catalyst 6500 Series Switch Wireless Integrated Services Module (WiSM) and the Cisco 7600 Series Router WiSM have eight internal Gigabit Ethernet distribution system ports (ports 1 through 8) that connect the switch or router and the integrated controller.These internal ports are located on the backplane of the switch or router and are not visible on the front panel Through these ports the controller can support up to 300 APs.

The controller network module within the Cisco 28/37/38xx Series WiSM can support up to 6812 or 25 APs (and up to 256, 256, 350or 350 clients respectively), depending on the version of the network module. The network module supports these APs through a Fast Ethernet distribution system port (on the NM-AIR-WLC6-K9 6-access-point version) or a Gigabit Ethernet distribution system port (on the 8-, 12-, and 25-access-point versions and on the NME-AIR-WLC6-K9 6-access-point version) that connects the router and the integrated controller. This port is located on the router backplane and is not visible on the front panel.The Fast Ethernet port operates at speeds up to 100 Mbps, and the Gigabit Ethernet port operates at speeds up to 1 Gbps.

The Catalyst 3750G integrated Wireless LAN Controller(WLC) switch has two internal Gigabit Ethernet distribution system ports (ports 27 and 28) that connect the switch and the integrated controller.These internal ports are located on the switch backplane and are not visible on the front panel Each port is capable of managing up to 48 APs However, Cisco recommends no more than 25 APs per port due to bandwidth constraints. The -S25 and -$50 models allow a total of 25 or 50 APs to join the controller.

Each distribution system port is, by default, an 802.1 Q VLAN trunk port. The VLAN trunking characteristics of the port are not configurable. Some controllers support LAG, which bundles all the distribution system ports of the controller into a single 802.3ad port channel. Cisco 4400 series controllers support LAG in software Releases 3.2 and later; Cisco 5500 series controllers Support LAG in software Releases 6.0 and later; and LAG is enabled automatically on the controllers within the Cisco WiSM and the Catalyst 3750G integrated WLC switch.

Fiberstore offers its own branded 1000BASE SFP module, as the following: 1000BASE-T SFP Transceiver, 1000BASE-SX SFP Transceiver and 1000BASE-LX SFP Transceiver. Now all products from Fiberstore are 30% Off.